FIRE EXIT HARDWARE |
UL FIRE DOOR RATING |
||
APPLICATION |
MODEL NUMBER |
MAXIMUM DOOR OPENING |
(A) 3 HOUR |
SINGLE DOORS Rim type |
7000-36 7000-48 |
4’0” X 8’0” |
◎ |
PAIRS OF DOORS Two surface mounted standard vertical rod type or less bottom rod(LBR) application. Prefix BTL before Part# a) Swinging in same direction b) Swinging in opposite direction (double egress) |
7100-3684 X 7100-3684 |
8’0” X 7’2” |
|
7100-3696 X 7100-3696 7100-4896 X 7100-4896 |
8’0” X 8’0” |
◎ |
|
PAIRS OF DOORS Two rim typr with mullion |
7000-36 X 7000-48 |
8’0” X 8’0” |
◎ |
All fire rated exit devices in all applications, are also labeled for (B) 11/2" hour, (C) 11/4" hour, (D) 1 hour, (E)3/4" hour.
All fire exit hardware meet UL10C and UBC 7-2-1997 codes.
3000-36 Rim type 36” door
3000-48 Rim type 48” door
3100-3684 Vertical rod type 36” x 84”
3100-3696 Vertical rod type 36” x 96”
3100-4896 Vertical rod type 48” x96”
3100-36120 Vertical rod type 36” x 120”
3100-48120 Vertical rod type 48” x 120”
7000-36 Rim type 36” door
7000-48 Rim type 48” door
7100-3684 Vertical rod type 36” x 84”
7100-3696 Vertical rod type 36” x 96”
7100-4896 Vertical rod type 48” x 96”
1) Specify exit device model number according to size of door.
2) Specify trim selection. For interchangeable core prefix "IC" brfore part#. See page 3.
3) For vertical rod device pecify LHR (Left Hand Reverse) or RHR (Right Hand Reverse) for convenience easily field reverible, otherwise shipped as LHR.
4) Specify finish:
Alim - Powder coated to match US26D.
Duro - Powder coated to match US10B.
Gold - Powder coated to match US4, US3.
5) On thru bolt applications, fire rated vertical rod device are packed with thru as standard feature. Thru bolts are also avai device. To order thru bolts add "SBN" to trim pack.
When ordering separately use following part#
part# 357─thru bolts for rim devices, 6PCs / pack.
part# 369─thru bolts for vertical rod devices, 14PCs / pack.
part# 363─thru bolts for rim devices, 6PCs / pack for 21/4" " thick doors.
part# 375─thru bolts for vertical rod devices, 14PCs / pack for 21/4" " thick doors.
221
Standard for 3100. Applied to surface of floor or to a flat threshold. Standard packaging.
227
Applied to surface of stop. No mortise required. Standard packaging.
233
Bottom strike. Alternate bottom strike. Flush mounting stainless steel. Furnished with expansion shields. Requires mortise in the floor.
239
For 3000 surface applied. Standard packaging.
245
Standard for 7100. Standard packaging.
233
Bottom strike for 7100. Flush mounting stainless steel. Furnished with expansion shields.
Requires mortise in the floor. Standard packaging.
245
For 7000 surface applied. Standard packaging.
251
Surface applied. Used on inactive leaf for device on active keaf of pair of doors without mullion.
LFF
Lock front filler.
SF
Strike filler.
401 - For rim tyoe, 1/8" thick
406 - For vertical type, 1/8" thick
412 - For fire rated vertical type, 1/8" thick
When exit device are used with shim kits with outside trim, spindle length thumbpiece and thru bolt length must be increased accordingly.
Prefix "CD" before part#. Available for all 3000 Series devices except fire exit hardware. Cylinder dogging with a mortise cylinder is located on the mounting insert lock bolt in retracted position. 27" minimum door width is required.
Lever Design / Knob Design / Escutcheon lever design / Thumbpiece Trim
Non handed Grade 1
Cylindrical body hardened steel heavy duty tailpiece.
For 1 3/4" " and 2 1/4" " doors. Available for fire and non fire rated rim and veritcal rod exit devices.
Rose diameter 3 1/2", lever length 4 3/4". Fits and covers 161 cutout.
Finishes: US26D, US10B, US3, US4.
8000/L Entrance
Key retracts latrchbolt, operates as classroom finctionunlocks lever.
ANSI Function - 08
CLU5000L Cluth Free Wheeling(ENTRANCE)
Key operation latchbolt, unlocked lever.
ANSI Function - 08
8000/S Storeroom
Key operation lever, otherwise always locked. ANSI Function - 04
8000/P Passage
Lever always operable and free. ANSI Function - 15
8000/D Dummy
Dummy trim. One sided. ANSI Function - 10
Standard 6-pin “C” keyway. Also available in Schlage C-K, Russwin D1, Corbin 60, Sargent LA, Falcon/Weiser E, Assa, and Kaba high securitycylinders.
Non handed Grade 2
Cylindrical body hardened steel heavy duty tailpiece. For 13/4" doors. Available for fire and non fire rated rim and veritcal rod exit devices.
Rose diameter 3". Fits and covers 161 cutout.
Finishes: US26D
8000/K Entrance
Key retracts latrchbolt, unlocks knob. ANSI Function - 08
8000/KP Passage
Knob always operable and free. ANSI Function - 15
8000/KD Dummy
Dummy trim. One sided. ANSI Function - 10
Grade 1, thrubolted design, clutch freewheeling. Non handed design. Easily field reversible.
Hardened ateel heavy duty tailpiece. Available for fire and non fire rated rim and vertical rod exit devices.
Power coated aluminum (alum)
Power coated dark bronze duranodic (duro)
Power coated glod
Standard 13/4"
2 5/16" width x 8 1/2" " length. Lever length: 4 3/4". Fits and covers 2 1/8" 161 cutout.
ESC-00 Entrance
Key locks or unlocks thumbpiece. ANSI Fuction - 13 / 63
ESC-05 Storeroom
Key retracts latchbolt, otherwise always locked. ANSI Fuction - 04
ESC-30 Passage
Trim always operable and free. ANSI Fuction - 15 / 62
ESC-40 Dummy
Tummy trim. One sided. ANSI Fuction - 10
Standard 6-pin “C” keyway. Also available in Schlage C-K, Russwin D1, Corbin 60, Sargent LA, Falcon/Weiser E, Assa, and Kaba high security cylinders.
Interchangable core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW.
THP-00 Entrance
Key locks or unlocks thumbpiece. ANSI Function - 13 / 63
THP-05 Storeroom
Key retracts latchbolt, otherwise always locked. ANSI Function - 04
THP-30 Passage
Trim always operable and free. ANSI Function - 15 / 62
THP-40 Dummy
Tummy trim. One sided. ANSI Function - 10
Standard 6-pin “C” keyway. Also available in Schlage C-K, Russwin D1, Corbin 60, Sargent LA, Falcon/Weiser E, Assa, and Kaba high securitycylinders.
Interchangable core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW.
Power coated aluminum (alum), dark bronze duranodic (duro), glod.
Standard 1 3/4"
ALM 3000-36 Alarm rim type 36"door (panic grade)
ALM 3000-48 Alarm rim type 48"door (panic grade)
ALM 7000-36 Alarm rim type 36"door (fire grade)
ALM 7000-48 Alarm rim type 48"door (fire grade)
Prefix "ALM" before part #.
Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide audible an means of signaling that the door has been opened and violated,
The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off.
Jumper cable is provided to swich to continuous alarm.
The key switch to turn the alarm off is a standard 11/4"cylinder with "C" keyway. The alarm operates on one standard 9 volt transistor battery. when battery is weak the horn will emit an intermittent signal.
Alarmed units are supplied with two switches. One switch moniters the push rail and the other switch monitors the latchbolt for full proof security.
Unit includes "emergency exit only. Alarm will sound"
LBR----------------------- No Bottom Strike, Free access for wheel chairs, strectcher and carts therefore eliminates tripping potential and disfiguration of floors due to dragging of bootom bolts.
For Doors --------------- 13/4” thick standard. 3 3/4” ” minimum stile width required for signle door application. 3 1/2” minimum stile width required for double door application. Lever trims available.
Chassis ------------------ Nonferrous alloy (Panic Grade), steel (Fire Grade).
Cover------------ Nonferrous alloy. Cover stock hollow metal doors with 161 cutout.
Mounting ---------------- Furnished standard with wood and machine screws. Thru bolts are standard packaging on fire rated devices.
Hand --------------------- Easily field reversible. Specify at time of order LHRB, RHRB for convenience.
Dogging Feature ------ Allen-type key furnished standard on non-fire labeled devices.
UL and ULC Listed ---- All Series for panic. BTL Series for fire exit hardware for all types of 8’ x 8’ double doors including double egress for up to 3 hours metal. Conforms to standards UL 10C and UBC 7-2-1997 codes.
Finish -------------------- Aluminum (alum), dark bronze duranodic (duro), gold.
Door size --------------- 36” x 84” / 48” x 96” / 36” x 96” doors.
Alarm -------------------- Available. Prefix “Alrm” before part #.
End Cap------------------Steel construction.
Latch Bolt,Spring ----- Stainless steel.
ANSI standard --------- A156.3, Grade 1.
Rail Assembly----- Heavy gauge steel, painted.
Strike --------------------- see strike page.
Touchbar height to finished floor | 41"(1043mm) at center |
Touchbar projection neutral |
2 1/2"(64mm) |
Center case | 5 1/8x2 3/4X 2(129mm x 69mm x 52mm) |
Device length - Short 3'(914mm) |
2'9"x3'(840mm to 914mm) door size 2'9"x4'(1145mm to 1219mm) door size |
Panic grade top & bottom latch case | 315/16"x21/8"x13/8"(100mm x 52mm x 42mm) |
Fire grade top latch case | 315/16"x211/16"x13/16"(100mm x 68mm x 53mm) |
top and bottom rod length for 36" x 84" doors | Top rod 43 1/4" (1350mm) |
top and bottom rod length for 48" x 96" doors | Top rod 53 1/16" (1350mm) |
Vertical rods | 1/2"(13mm) Round tubing. |
For Doors -------------- 13/4” thick standard optional 21/4” minimum stile width required for signle or double door application using standard 239 strike and pull or lever trims.
Chassis ------------------ Nonferrous alloy (Panic Grade), steel (Fire Grade).
Cover------------ Nonferrous alloy. Cover stock hollow metal doors with 161 cutout.
Mounting ---------------- Furnished standard with wood and machine screws. Available with thru bolts on request.
End Cap-------Steel construction.
Alarm--------- Available. Prefix “Alrm” before part #.
End Cap-------Steel construction.
Hand --------------------- Easily field reversible. Specify at time of order LHRB, RHRB for convenience.
UL and ULC Listed -- 3100 Series for panic. 7100 Series for fire exit hardware for all types of 8’ x 8’ double doors for up to 3 hours fire labeled installations, conforms to standards UL 10C and UBC 7-2-1997 codes.
Dogging Feature ------ Allen-type key furnished standard on non-fire labeled devices.
Finish -------------------- Aluminum (alum), dark bronze duranodic (duro), gold.
Rail Assembly----- Heavy gauge steel, painted.
Latch Bolt,Spring ----- Stainless steel.
ANSI standard --------- A156.3, Grade 1.
Rail Assembly----- Heavy gauge steel, painted.
Strike --------------------- see strike page.
Door size--------------- 36” x 84” / 48” x 96” / 36” x 96” doors.
Touchbar height to finished floor | 41"(1043mm) at center |
Touchbar projection neutral depressed |
2 1/2"(64mm) 1 3/4"(45mm) |
Center case | 5 1/8x2 3/4X 2(129mm x 69mm x 52mm) |
Device length - Short 3'(914mm) |
2'9"x3'(840mm to 914mm) door size 2'9"x4'(1145mm to 1219mm) door size |
Panic grade top & bottom latch case | 315/16"x21/8"x13/8"(100mm x 52mm x 42mm) |
Fire grade top latch case | 315/16"x211/16"x13/16"(100mm x 68mm x 53mm) |
Fire grade bottom latch case | 315/16"x21/8"x13/8"(100mm x 52mm x 42mm) |
top and bottom rod length for 36" x 84" doors | Top rod 43 1/4" (1350mm), bottom rod 37 3/4" (960mm) |
top and bottom rod length for 48" x 96" doors | Top rod 53 1/16" (1350mm), bottom rod 37 3/4" (960mm) |
Vertical rods | 1/2"(13mm) Round tubing. |
For Doors |
13/4" thick standard optional 21/4" thick. 41/2" minimum stile width required for signle or double door application using standard 239 strike and pull or lever trims. |
Chassis |
Nonferrous alloy (Panic Grade), steel (Fire Grade). |
Cover |
Nonferrous alloy. Cover stock hollow metal doors with 161 cutout. |
Mounting |
Furnished standard with wood and machine screws. Available with thru bolts on request. |
End Cap |
Steel construction. |
Alarm |
Available. See page. |
Hand |
Non handed, center hub. |
Latch Bolt |
Stainless steel 3/4" throw. |
Spring |
Stainless steel throughout. |
ANSI standard |
A156.3, Grade 1. |
Rail Assembly |
Heavy gauge steel, painted. |
Strike |
239 packed atandard (see strike page). |
Dogging Feature |
Allen-type key furnished standard on non-fire labeled devices. Cylinder dogging available. |
Mullion |
Available. |
UL and ULC Listed |
3000 Series for panic. 7000 Series for fire exit hardware for all types of 4' x 8' single doors and 8' x8' doors for up to 3 hours fire labeled installations, conforms to standards UL 10C and UBC 7-2-1997 codes. |
Finish |
Alum/Duro/Gold |
Door size |
32" / 36" / 48" |
Touchbar height to finished floor |
41"(1043mm) at center |
Touchbar projection |
2 1/2"(64mm) |
Center case |
5 1/8x2 3/4 x2(129mm x 69mm x 52mm) |
Device length - Short 3'(914mm) |
2'9"x3'(840mm to 914mm) door size |
For Doors | Wood / metal. 1 3/4” (44.5mm) minimum thickness; 4 1/2” (114mm) minimum stile width |
Chassis | Nonferrous alloy |
Chassis Cover | Bronze or stainless steel |
End Cap | Brass, bronze or stainless Steel Construction |
Handing | Non-Handed. Specify RHR or LHR for convenience |
ANSI standard | A156.3, Grade 1. |
Mounting | Furnished standard with wood and machine screws. |
Strike | Standard ANSI strike |
Mortise Lock | Grade (1) for 1 3/4” (44.5mm) thick doors. Reversible. Fits door prepared for ANSI Standard A115.1 |
Fire Exit hardware | MR7700 Series for fire exir hardware for all types of 8” x 8” double doors for up to 3 codes. |
Trim | See trim Designs section |
Finish | (ELR) Electrical Latch Retraction and RX & LX Signal Switch available |
Door size | MR7700-36 for 36” doors. MR7700-48 for 48” doors. |
- Rigid, non clutch mechanism.
- Double heavy duty spring support to prevent sagging and enhance openration.
- Grade 1, thrubolted design, clutch freewheeling. Non handed design. Easily field reversible.
- Hardened ateel heavy duty tailpiece. Available for fire and non fire rated rim and vertical rod exit devices.
Standard 1 3/4"
2" width x 8 " length. Lever length:4 3/4"
Fits and covers 2 1/8" 161 cutout
MRESC-7700 Entrance
key locks or unlocks lever ANSI Fuction - 63
MRESC-7705 Storeroom
key retracts latchbolt, otherwise always locked. ANSI Fuction - 04
MRESC-7730 Passage
Trim always operable and free. ANSI Fuction - 62
Standard 6-pin “C” keyway. Also available in Schlage C-K, Russwin D1, Corbin 60, Sargent LA, Falcon/Weiser E, Arrow, Yale GA, Yale 8, Kwikset. Can also accept Medeco, Assa, and Kaba high security cylinders.
Metal Doors / Wood Doors / Trim Selection
For Doors | Wood / metal. 1 3/4” (44.5mm) minimum thickness; 4 1/2” (114mm) minimum stile width |
Chassis | Nonferrous alloy |
Chassis Cover | Zinc |
End Cap | Zinc Construction |
Handing | Non-Handed. Specify RHR or LHR for convenience |
ANSI standard | A156.3, Grade 1. |
Mounting | Furnished standard with wood and machine screws. |
Strike | Standard ANSI strike |
Mortise Lock | Grade (1) for 1 3/4” (44.5mm) thick doors. Reversible. Fits door prepared for ANSI Standard A115.1 |
Fire Exit hardware | MR7700 Series for fire exir hardware for all types of 8” x 8” double doors for up to 3 codes. |
Trim | See trim Designs section |
Door size | FC7586F/7587F-3684 for 36" x 84" doors. FC7586F/7587F-3696 for 36" x 96" doors. Other sizes available on request |
- Grade 1, thrubolted design, clutch freewheeling. Non handed design. Easily field reversible.
- Hardened ateel heavy duty tailpiece. Available for fire and non fire rated rim and vertical rod exit devices.
Architectueal plated finishes
Standard 1 3/4"
2 5/16" width x 8 1/2" length. Lever length: 4 3/4". Fits and covers 2 1/8" 161 cutout
CVRESC-7700 Entrance
Clutch Mechanism key locks or unlocks lever Operates as classroom function ANSI Fuction - 63
CVRESC-7705 Storeroom
Clutch Mechanism key retracts latchbolt, otherwise always locked. ANSI Fuction - 04
CVRESC-7730 Passage
Trim always operable and free. ANSI Fuction - 62
CVRESC-7740 Dummy
Dummy trim. One sided. ANSI Fuction - 10
Standard 6-pin “C” keyway. Also available in Schlage C-K, Russwin D1, Corbin 60, Sargent LA, Falcon/Weiser E, Arrow, Yale GA, Yale 8, Kwikset. Can also accept Medeco, Assa, and Kaba high security cylinders.
Interchangeable core locks will accept compatible 6 or 7 pin cores with BEST, FALCON and ARROW.